8r-pixel-push-button
Designed to be installed into any lift with ease and comes pre-packed full of functions so all you have to do is plug it in and they are ready to use.

8r-push-button-header

A vandal resistant stainless steel button face, with in-built beeps, dual illumination and raised braille for the vision impaired.

  • ILLUMINATED LEGEND & BRAILLE
  • 50MM MOUNTING STUD POSITIONING
  • TRUE DUAL WHITE & BLUE LED ILLUMINATED CONTROL CIRCUIT

  • BUILT IN BEEPS FOR VISION IMPAIRED
  • LOOP TO LOOP CONNECTING WIRES
  • TRUE DUAL AMBER & GREEN ILLUMINATED PHONE BUTTON

  • MOLEX CONNECTORS FOR PLUG & PLAY
  • RAISED RIM FOR VISION IMPAIRED
  • DUAL CONTACT WITH INDEPENDENT N/C & N/O SECTORS

Designed and Manufactured in Australia to meet the highest standards in materials available from world class manufactures and suppliers.

A vandal resistant stainless steel button face, with in-built beeps and raised Braille for the visually impaired.

Dual illumination with contrasting colours that switch the standby LED off when the button command has acknowledged the controller.

OPERATION DETAILS
Button Voltage 24V DC
LED Current 15mAmps Maximum
Button Face
Vandal Resistant Stainless Steel
Case
UL-94V Rated Polycarbonate Case
Contacts
Dual Contacts with N/O & N/C Selectable
Contacts Rating
125V-AC 3Amps, 30V-DC 2Amps
Contact Resistance
30mOhm
Durability
1,000,000 Presses Minimum
Operating Temperatures
-25°C – 85°C
Humidity Ambient Humidity 60% Maximum
Legend
Illuminated Arial Font With 15mm Character Height
Button Diameter
31mm
Mounting Stud Positioning 50mm
Depth 18mm Compact Design

 

button-dimensions

When ordering 8R Push Buttons you may also need to purchase a CABLE INTERFACED CIRCUIT BOARD and a 4 WAY CABLE LOOM.

The ‘Cable Interfaced Circuit Board’ powers and transmits data to each of your buttons and the ‘4 Way Cable Loom’ carries that
power and data.

1 X CABLE INTERFACED CIRCUIT BOARD POWERS 12 BUTTONS. If you have in excess of 12 buttons you will need to purchase an additional Circuit Board.

1 X 4 WAY CABLE LOOM REQUIRED FOR EACH BUTTON. They are sold as a single item or in packs of 12.

PRODUCT MODEL / DETAILS / ID
up-pixel-button UP ARROW (ID = UP)
Push Button Up Arrow
down-arrow DOWN ARROW (ID = DN)
Push Button Down Arrow
telephonebutton TELEPHONE (ID = PH)
Push Button Phone
 lower-ground LOWER GROUND (ID = LG)
Push Button Lower Ground
 basement BASEMENT (ID = B)
Push Button Lower Ground
 open-doors DOORS OPEN (ID = DO)
Push Button Doors Open
doors-closed DOORS CLOSED (ID = DC)
Push Button Doors Close
ground-floor GROUND FLOOR (ID = G)
Push Button Ground Floor
meezzanine MEZZANINE (ID = M)
Push Button Mezzanine
disability DISABILITY (ID = D)
Push Button Floors (Up to 24
1to24 FLOORS 1- 24 (ID = NUMBER, 1 IS 1)
Push Button Floors (Up to 24)
cable-board-a CABLE INTERFACED CIRCUIT BOARD A (ID = PB-1B12)
Single Wire Interface Board
cable-board-b CABLE INTERFACED CIRCUIT BOARD B (ID = PB-2B12)
Dual Wire Interface Board
cable-loow 4 WAY CABLE LOOM (X 1 ID = PB-CB1, X12 = PB-CB12)
4 Way Cable Loom, Single Or Packs Of 12
 
Icon

Push Buttons Ordering Info

...

340.33 KB 35 downloads

 

Icon

Push Buttons 8R Brochure

...

3.41 MB 54 downloads

fixtures-header2

The FX-A range of LED hall lantern arrow modules are well suited for new lift installations or upgrading existing buildings.

  • HIGH QUALITY BRIGHT LEDS
  • ENERGY EFFICIENT & LONG LIFE
  • AVAILABLE IN VARIOUS COLOURS

  • POLARITY PROTECTED CIRCUIT (FX-A)
  • POLY CARBONATE MOULD (FX-A)
  • CUSTOM MOUNTING (EID)

  • UNIQUE CUSTOM DESIGN (EID)
  • CUSTOM LETTERS/NUMBERS (EID)
  • IN-BUILT GONG OPTION (EID)

FX-A

The FX-A range of LED hall lantern arrow modules are well suited to new lift installations or to lift modernization projects.

The LEDs employed have a life of more than 100,000 hours so in addition to providing ongoing energy savings they will significantly reduce the incidence of lighting failures and thus also reduce maintenance costs.

The FX-A hall lantern arrow module is supplied ready to install in a project’s custom landing fixture or can also be supplied assembled into an attractive horizontal or vertical, intermediate or terminal low profile surface mount fixture (see our FX range of landing fixtures). The hall lantern module is available in four different LED colours.

FX-EID

The Elevator Identify Display (EID) is an ideal product for destination control lift systems. It provides a highly visible illuminated legend to show the lift car identification. This device is easy to wire and connect to any existing installation and comes in a range of colours. The device can be equipped with an arrival gong.

FX-A

OPERATION DETAILS
Supply Voltage
18V – 30 DC
Operating Current (LED)
50mA @ 24V DC
Dimensions
88 (L) X 75 (W) X 30 (H)

 

FX-EID

OPERATION DETAILS
Supply Voltage
15V – 30 DC
Operating Current (LED)
180mA
Operating Current (AD-2)
250mA
Operating Temperature
0°C to 50°C
Humidity
Up To 90% Non Condensing
Dimensions
255 (L) X 75 (W) X 211 (H)

 

PRODUCT MODEL / DETAILS / ID
fx-a FX-A/WW
White LED Arrow Fixture
fx-a FX-A//WB
Blue LED Arrow Fixture
fx-eid FX-EID
LED Elevator Identify Display

 

Icon

FX Landing Range Brochure

...

791.04 KB 70 downloads

Illuminate equipment with an intense and compact lighting source using an array of extremely reliable and energy efficient LEDs.

  • HIGH QUALITY BRIGHT LEDS
  • ENERGY EFFICIENT & LONG LIFE

  • POLARITY PROTECTED CIRCUIT
  • VARIOUS COLOURS AVAILABLE (FX-4)

  • VARIOUS MOUNTING OPTIONS (FX-6)
  • POLYCARBONATE ENCLOSURE (FX-6)

 

fx-4l-small-head

The FX-6L range of LED modules are ideal for lift modernization projects, enabling existing hall lanterns to be retained through simple and cost effective replacement of inefficient incandescent globes with highly efficient LED modules.

The LEDs are particularly bright (cool white : 6500 K) and thus will significantly improve the visibility of older style acrylic or etched glass hall lanterns which may have discoloured through years of service.

With a LED life of more than 100,000 hours, in addition to providing ongoing energy savings, the modules will significantly reduce the incidence of lighting failures and thus also reduce maintenance costs. Can be mounted in back box using studs, screws or double sided adhesive tape.

The FX-6L/W Strip Module is suited to large square or elongated back-lit lanterns, or edge-lit “blade” style lanterns. The interlocking tabs allow modules to be joined side by side for very large square or rectangular lanterns or end to end for very tall edge-lit “blade” style lanterns.

The FX-6L/CW Circular Module is suited to regular square, round or triangle shaped back-lit lanterns. Of course both modules can be used in applications other than in hall lanterns.

 

fx-6l-small-head

The FX-4L Led Module provides the means to illuminate equipment with an intense and compact lighting source using an array of extremely reliable and energy efficient LEDs. The module has a number of mounting options – with and without the robust polycarbonate enclosure – so is just as well suited to new equipment installations as to on-site retrofitting or modernization.

The LEDs employed have a life of more than 100,000 hours so in addition to providing ongoing energy savings they will significantly reduce the incidence of lighting failures and thus also reduce maintenance costs.

The FX-4L LED Module is an ideal replacement for traditional incandescent globes in lift hall lanterns as it delivers significantly superior illumination –standing out against general landing lighting, even at a wide viewing angle.

The FX-4L LED Module is available in cool white (FX-4L/W), red (FX-4L/R), blue (FX-4L/B) and green (FX-4L/G) and thus provides an opportunity to “make a statement” by introducing a splash of vibrant colour to a wide range of applications.

fx-4l-small-head

OPERATION DETAILS
Supply Voltage 12V-30V DC – 16V – 30V AC
Operating Current
170mA @ 24 DC (Colour Dependent)
Dimensions 71mm (L) x 48mm (W) x 18mm (H)

fx-6l-small-head

OPERATION DETAILS
Supply Voltage 18V-24V DC
Operating Current
90mA @ 24 DC
Dimensions FX-6L/W: 72(L) x 12(W) FX-6L/CW: 35 (Diameter)

 

PRODUCT MODEL / DETAILS
 4l-small-white2 FX-4L/W
LED Lighting – Cool White
 4l-small-blue FX-4L/B
LED Lighting – Blue
4l-small FX-4L/R
LED Lighting – Red (Made To Order)
6l-strip-small  FX-6L/W
LED Strip Module Lighting – Cool White
 6l-circle-small  FX-6L/CW
LED Circular Module Lighting – Cool White

 

Icon

FX-4L & FX-6L Brochure

...

845.47 KB 24 downloads

Like What You See?