With its compact design, emPOWER provides an Industrial RCBO protected 240V AC output on mains power failure, allowing connection of industrial motors such as fans and pumps, to a maximum of 100W.

  • 240V AC PURE SINE WAVE POWER BACKUP UP TO 100W
  • BUILT TO COMPLY WITH THE HIGHEST INDUSTRY STANDARDS EN-81-20 5.10.1.2.3, 
 AS3000-2007 1.5.6.3 & 2.6.3.2
  • EASY INSTALLATION TO THE EXISTING FAN AND LIGHTING BRANCH-CIRCUIT
  • PLUG AND PLAY FOR SEAMLESS FUTURE MAINTENANCE
  • INTELLIGENT AUTO SLEEP | POWER SAVER FEATURES

  • 12-24V OUTPUT FOR EMERGENCY TELEPHONE
  • REPLACEABLE 12V 9A SLA BATTERIES
  • INTELLIGENT BATTERY MONITORING SYSTEM
  • IoT (Internet Of Things) READY
  • SYSTEM STATUS LED’S INDICATORS
  • RCD PROTECTED OUTPUT TO COMPLY WITH BUILDING AND LIFT STANDARDS
  • ALL INPUTS / OUTPUTS FUSE PROTECTED

  • WAKE UP TIME: 15 MILLISECOND
  • AC INPUT CONNECTOR 240V: SWITCHED ACTIVE 
 (S/A) WIELAND GST18i4 SERIES 4-Pin
  • AC OUTPUT CONNECTOR 240V: WIELAND
 GST18i3 SERIES 3-PIN
  • DIMENSIONS (LxWxH): 
 255mm x 159mm x 130mm
  • FUSE 1 / 2 RATING: 1A
  • WEIGHT: 7.86KG WITH BATTERIES

With its compact design, emPOWER provides an Industrial RCBO protected 240V AC output on mains power failure, allowing connection motors such as fans and pumps, to a maximum of 100W. Explicitly designed for elevator fans, the emPOWER delivers pure 240V AC Sine wave to run most sensitive electronics up to 2 hours at 55W on battery backup. The auto intelligent motion system capable of detecting the elevator car, doors or human movement, can shutdown connected devices to save energy when the elevator is parked or empty.
Easily installed into new or existing elevators with a flexible plug and play wiring loom. Maintenance or changeovers are seamless without any additional wiring to 240V. The self test mode will simulate a true power failure with all connected devices running directly from the internal battery backup. LED indicators will show the status if the battery requires attention or replacement to help meet the user’s rated specification needs.
OPERATION DETAILS
Input Voltage 240V AC @ 50Hz
Output power (Max.)
100 Watts
RCBO rating
30mA trip current
(Clipsal RCBE210/30S)
Output voltage
240V AC @ 50Hz
Max. Rated current
250mA
Battery backup Time
2 Hours @ 55Watts
Auto off time out
1-10 min
Operating temperature 0°C – 40°C
Wake up time 15 milliseconds
Weight 7.86Kg with batteries x 87mm (H)

 

PRODUCT MODEL / DETAILS

EMPOWER

PSW-1ooW

 

The EL-80W/RCBE has an in-built RCBO (Residual Current Breaker with Overcurrent). It is designed to protect human life, and protects your device in the event of an overload on a particular circuit.

  • PREVENTS A FATAL SHOCK
  • FLOURESCENT LAMP COMPATIBLE
  • AUTOMATED TESTING
  • PIEZO BUTTON TO INDICATE FAULT
  • PROLONGED BATTERY LIFE THROUGH (LVD) LOW VOLTAGE DISCONNECT

  • PREVENTS OVERLOAD ON A CIRCUIT
  • 12V SIREN WITH ALARM BUTTON
  • 12V OUTPUT FOR EMERGENCY PHONE
  • MOUNT HORIZONTAL OR VERTICAL
  • PROLONGED BATTERY LIFE THROUGH (OCC) OPEN CIRCUIT CONDITION

  • PREVENTS A SHORT CIRCUIT
  • ALL INPUTS/OUTPUTS FUSED
  • STATUS INDICATING LEDS
  • COMPLIES WITH AUSTRALIAN STANDARDS
  • INTELLIGENT BATTERY MONITORING SYSTEM

The EL-80W is an emergency lighting backup system. It incorporates the latest microprocessor technology to achieve intelligent automated self-testing functionality and maximum light operation.

It is capable of driving lighting of 240V. The EL-80W complies with the Australian standard for emergency lighting by providing more than the required light intensity for more than the minimum time of 2 hours.

The RCBE component is a type of circuit breaker with two functions.

  1. To protect life
  2. To protect an overload on a circuit – overcurrent and short circuit

The RCBE component is to prevent an overload on a particular circuit at the same time as preventing anyone getting a shock that has the potential to kill them.

On initialization of a self-test, a power failure is simulated and the lamps are operated for up to 2 hours. LED indicators and a buzzer will alert maintenance personnel that either the lamps or the battery require attention or replacement in order to meet their rated specifications.

The unit can be easily installed into existing and new elevators with its flexible flat or vertical mounting options.

OPERATION DETAILS
Operating Voltage 240V AC
Lamp Output
240V AC
Lamp Output (Battery Mode)
240V AC
Lamp Fuse (Fuse 1)
1A 240V
Circuit Fuse (Fuse 2)
0.5A 240V
Phone Output Voltage
12V DC (500mA Max)
Alarm Button
Dry Contacts
Siren Output Voltage 12V DC (500mA Max)
Lamp Wattage 5W-80W
Dimensions 312mm (L) x 262mm (W) x 87mm (H)

 

PRODUCT MODEL / DETAILS
el-range-small EL-80W/RCBE

Surge Protected Lighting Backup

sl-bat SR-EL/BAT

emLIGHT Battery

 

Like What You See?