emfone-communication-systems
Our intercom systems allow easy and low cost expansion from a single lift, to multiple lifts, to multiple machine rooms.

The EM-4GE/IS Intercom System is a comprehensive package to ensure all your lift communication needs are met. This system is capable of driving 13 stations and up-gradable to 26 with an additional IS Card.

 

Plug and play via LAN cable within the machine room makes connecting multiple lifts a breeze, and with a back-up battery and an integrated redundancy 3G gateway you can be sure your system will continue to operate during a power failure or network down-time.

  • CAPABLE OF DRIVING 13 STATIONS PER CARD
  • FAIL-SAFE BATTERY BACKUP SUPPLY IN CASE OF POWER FAILURE
  • COMPATIBLE WITH ALL WIRELESS MOBILE NETWORKS IN AUSTRALIA
  • AUTOMATIC FAULT NOTIFICATION OPTIONS
  • SELF TESTING & REPORTING IN ACCORDANCE WITH EN:81-28
  • SUITABLE FOR FTTP, FTTN, FTTB and VoIP GATEWAYS
  • COMPATIBLE WITH emFONE & ALL ACMA APPROVED TELEPHONES
  • DURABLE, SELF-CONTAINED WALL CABINET

  • EASY PLUG & PLAY INSTALLATION
  • VOICE & SMS COMMUNICATION
  • REMOTE MANAGEMENT OF THE SYSTEM VIA SMS
  • EASY ON SITE INSTALLATION & MAINTENANCE
  • REDUNDANCY NETWORK CONNECTIONS
  • OPTO-ISOLATED INPUT
  • FAULT RELAY CONTACTS
  • TESTED TO WITHSTAND 5000 VOLT TRANSIENTS

 

SYSTEM DIAGRAM

 

OPERATION DETAILS
Telephone Line Voltage 48V
Operating Current 30mA (standard)
Operating Range
0 – 40mA
Busy Tone
425Hz. 375ms on, 375ms off
Dial Tone
425Hz
Ring Signal
64.5Vrms @ 25Hz. 400ms on, 200ms
off, 400ms on, 2000ms off

 

Icon

EM-4GE Compliance

...

130.07 KB 169 downloads
PRODUCT MODEL / DETAILS
em-4ge

EM-4GE/IS

Dual SIM Wireless Intercom System

CD-LX/SK

Machine Room Master Intercom

CD-LX/SK

Top Of Car or Pit Intercoms

 

CD-LX/SL

Lift Car Intercom Station

EM-MRT

Machine Room Terminator

CB-LAN5M

5 Metre LAN Cable

 

Icon

EM-4GE-IS Brochure

...

3.61 MB 316 downloads

The emFONE CD-LX8 System is an auto-dialing lift intercom system designed to save both time and money in all aspects of the installation.

  • AUTO DIALLING LIFT INTERCOM SYSTEM
  • BUILT IN AUTO SCAN & DETECT
  • MEETS EN81-28 STANDARDS
  • EVENT REPORTING TO CONTROL CENTRE

  • BACKUP BATTERY SYSTEM
  • FULLY PROGRAMMABLE
  • ROBUST 4 WIRE BUS, UP TO 32 STATIONS
  • COMMUNICATE BETWEEN ANY STATION

  • HANDSFREE LOUDSPEAKER
  • PROGRAMMABLE OUTPUT RELAYS
  • ALARM ALTERING OPTION
  • VOLUME CONTROL

The emFONE LX System is an auto-dialing lift intercom system designed to save both time and money in all aspects of the installation. A single telephone line can be shared by up to 32 intercom stations and a robust 4-wire bus arrangement allows simple cabling solutions avoiding the need to run individual wires to each intercom station.

The system will dial out to the lift company using the single external line connected to the master, identifying the lift no and location of the call. The unit can be programmed to then automatically dial out to building management following the call to the lift company.

The system will help a person unable to communicate with the service provider, either because of a physical disability or language difference. A remote programmable digital voice message, of up to 16 seconds, is played upon answer of the call, and is used to identify the calling location to service provider.

The lift company can ring into the system and select any lift car or intercom station to communicate with or if necessary talk to all intercom stations by a group page.

OPERATION DETAILS
Operating Voltage 110V AC -240V AC, 50HZ
Operating Current 60mA (Standby)
350mA (Operating)
Telephone Line Voltage 24V – 50V DC
Telephone Line Current 10mAm – 90mA
Dialling Method Tone (DTMF)
Backup Battery System Lead Acid – operating life of 3 years minimum
Battery Operating Time 8 hours Standby; 4 hours Full Operation
Digital Voice Message Non Erasable Memory – 100 year message retention & 100,000 record cycles
Message Length 16 seconds, user programmable remotely
Cable Paired wire 2 off

 

PRODUCT MODEL / DETAILS
lx8smalll CD-LX8/M

Lift Intercom Master Unit

lift-intercom-small CD-LX/SK

Builders Lift Intercom

lx CD-LX/SL

Keypad With Internal Speaker and Microphone

 lx-sk  CD-LX/SLX

Keypad With External Speaker & Microphone

 

Icon

CD-LX8 System Brochure

...

990.70 KB 107 downloads

digital-ip-coms-sys

The emFONE Digital IP Communication System is a feature rich intercom package. Designed originally for the elevator industry this system now extends to provide communication to a whole building complex, and can easily be controlled from one central location.

  • COMPLETE VoIP INTERCOM SYSTEM
  • FULL DUPLEX COMMUNICATION
  • HIGH QUALITY HANDS FREE
  • PRESS TO TALK CAPABILITY
  • ADJUSTABLE CALL TIME DELAY
  • CALL TRIGGER VIA SCREAM ALARM
  • QUEUING SYSTEM BASED ON PRIORITY
  • CALLER ID DISPLAY

  • PAGE ALL & GROUP CALLS
  • VOICE IDENTIFICATION & VERIFICATION
  • 2 RELAYS & PROGRAMMABLE FEATURES
  • MULTIPLE CONSOLE SUPPORT
  • CONNECT MULTIPLE TELEPHONE LINES
  • DIAL OUT TO EMERGENCY/MAINTENANCE
  • DIAL IN FROM PSTN OR PABX SYSTEMS
  • LOCAL/REMOTE WEB SERVICE

  • AUTO SELF DIAGNOSTICS
  • AUTO FAULT REPORTING
  • AUTO SPEAKER/MICROPHONE TEST
  • CONTINUOUS STATUS MONITORING
  • RECORD/LOG CONVERSATIONS
  • MULTIPLE WEB SERVICE LOGINS
  • BATTERY BACK 4 HOURS TALK TIME
  • MEETS EN81-28 STANDARDS

The emLINK VoIP LX system is a feature rich auto-dialing lift intercom system. Designed from the ground up for the elevator industry this system utilizes VoIP technology. All lift car, pit, and machine room phones can be connected via a LAN network to a central console located in the building management office. Multiple consoles can also be connected to the network to provide various answer points. The addition of an optional Web based emLINK server PC further simplifies setup and control, and also provides additional features such as time stamped logging of all alarms and any system faults, as well as recording and playback of all alarm calls made on the system. Up to 16 individual emergency call numbers can be programmed into the system in the event the security desk does not respond to the alarm call. The system can also be connected to a single external line or multiple external lines with the connection of multiple LAN to PSTN / PABX Line Trunks.

VoIP technology allows easy and low cost expansion of the system from a single lift to multiple lifts to multiple machine rooms. The lift phones from several separate local buildings can even be connected to the one management office where the one LAN network also connects these buildings. Designed to save both time and costs in all aspects of the installation the system utilizes the robust and renowned emFONE LX system 4-wire bus architecture to connect the machine room to various stations via the lift car trailer cable up to 400m. Where LAN cable connection is not possible a Design-com 2 wire ethernet converter solution is available for distances over 1km.

The system has been designed in such a way that our existing LX stations can be connected to the VoIP system without any additional cabling or software changes by simply upgrading the master unit in the motor room with a new VoIP compatible LX1 Master unit. The complete system including all networking hardware is battery backed up with a minimum of 4-hours talk time on power failure, and is fully EN-81-28 compliant.

daigram3
PRODUCT MODEL / DETAILS
console-small

CD-LX/C

Control Console

md-small

CD-LX1/MD

Machine Room Master

lift-intercom-small

CD-LX/SK

Builders Lift Intercom

de-1

DE-1

Help Point Intercom

lx CD-LX/SL

Keypad With Internal Speaker and Microphone

lx-sk CD-LX/SLX

Keypad With External Speaker & Microphone

 

Icon

Digital IP Communication System Brochure

...

2.09 MB 67 downloads

lift-intercom-header2

Communication and emergency response is the most vital requirement of any building site. For this reason we have developed a reliable and easy to use product designed and perfected to maintain communication between construction workers.

  • TALK FROM LANDING TO LIFT CAR
  • TALK FROM LIFT CAR TO LANDING
  • COMMUNICATE BETWEEN MULTIPLE LIFTS

  • SINGLE/DUPLEX CAR CAPABILITIES
  • TRIPLEX/HOIST CAR CAPABILITIES
  • HIGH QUALITY COMMUNICATIONS

  • LOW VOLTAGE POWERED SYSTEM
  • PROGRAM MULTIPLE NUMBERS
  • COMMUNICATE FROM JOB SITE TO CAR

The emFONE Builders Lift Intercom offers the complete solution to any new building site. The system offers a crystal clear communication path between any landing station and the elevator / hoist master device, allowing one to one or one to all communication throughout.

With the capability to connect up to 3 separate lifts / hoists the user on each landing can decide exactly which lift / hoist they want to talk to. The operator in the lift / hoist can then choose to “talk back” which will open a path back to the station that called them.

All units come with the additional safety call buttons of FIRST AID & SITE OFFICE. When pressed for 5 seconds these buttons will initiate an emergency call back to the first Aid officer or site office. Multiple numbers can be programmed into the system to ensure the call is answered.

diagram-intercom
OPERATION DETAILS
Operating Voltage 18V DC
Data Bus P2P Single Wire
Station Data Bus Nodes
78 Stations (max)
Signal 600 Ohm Impedance
Speaker Level
80dB (max)
Microphone Adjustable – 5m Range
Operating Temperature 0°C – 50°C

 

PRODUCT MODEL / DETAILS
sc-little

CD-BI/SC

Car Station Intercom

 sl-little

CD-BI/SL

Landing Station Intercom

cd-te-small

CD-BI/TE

Trailer Cable Termination Board

bi-psu-litttle

CD-BI/PSU

Power Supply

 

Icon

Builders Lift Intercom Brochure

...

999.03 KB 33 downloads

Like What You See?