Lift Encoders
| Operating Voltage | 12 – 24V DC (absolute maximum 33V DC) |
|---|---|
| Operating Current | 65mA, 100mA with Wi-Fi Active |
| Input Protocols | GAL CAN, OTIS RSL |
| Output Interface | RS-485 |
| Output Protocols | Pixel Technologies Mode 3 |
| Pixel DataBus Length | Up to 64 nodes & 400m (max) |
| Wi-Fi Access point | 802.11b/g/n |
| Configuration | On-Device HTTP Webserver |
| Status Indication | Status (RGB LED) |
| Operating Temperature | 0 – 50°C |
| Operating Humidity | 90% max relative humidity, noncondensing |
| Mounting | Surface mounting or DIN Rail |
| Dimensions (mm) | 68(W) x 95.6(H) x 15(D) |
CT-E10 Lift Encoder
Lift Encoder
The CT-E10 interface module converts OTIS RSL serial link or KONE SPI serial link to the Pixel Technologies DataBus protocol.
| Operating Voltage | 12 – 24V DC (absolute maximum 33V DC) |
|---|---|
| Operating Current | 65mA, 100mA with Wi-Fi Active |
| Input Protocols | GAL CAN, OTIS RSL |
| Output Interface | RS-485 |
| Output Protocols | Pixel Technologies Mode 3 |
| Pixel DataBus Length | Up to 64 nodes & 400m (max) |
| Wi-Fi Access point | 802.11b/g/n |
| Configuration | On-Device HTTP Webserver |
| Status Indication | Status (RGB LED) |
| Operating Temperature | 0 – 50°C |
| Operating Humidity | 90% max relative humidity, noncondensing |
| Mounting | Surface mounting or DIN Rail |
| Dimensions (mm) | 68(W) x 95.6(H) x 15(D) |
CT-E9 Lift Encoder
Lift Encoder
The CT-PX2 interface module is a multi-protocol lift encoder providing a serial link interface for both the Galaxy CAN and Otis RSL and converting these into Pixel Technologies Mode 3 DataBus protocol, providing seamless integration from lift controller to Pixels audio & visual devices.
| Operating Voltage | 12 – 24V DC (absolute maximum 33V DC) |
|---|---|
| Operating Current | 65mA, 100mA with Wi-Fi Active |
| Input Protocols | GAL CAN, OTIS RSL |
| Output Interface | RS-485 |
| Output Protocols | Pixel Technologies Mode 3 |
| Pixel DataBus Length | Up to 64 nodes & 400m (max) |
| Wi-Fi Access point | 802.11b/g/n |
| Configuration | On-Device HTTP Webserver |
| Status Indication | Status (RGB LED) |
| Operating Temperature | 0 – 50°C |
| Operating Humidity | 90% max relative humidity, noncondensing |
| Mounting | Surface mounting or DIN Rail |
| Dimensions (mm) | 68(W) x 95.6(H) x 15(D) |
CT-PX2 Serial Link Interface Encoder
Serial Link Interface Encoder
The CT-PX2 interface module is a multi-protocol lift encoder providing a serial link interface for both the Galaxy CAN and Otis RSL and converting these into Pixel Technologies Mode 3 DataBus protocol, providing seamless integration from lift controller to Pixels audio & visual devices.