Data
| Operating Voltage | 15V DC – 28V DC |
|---|---|
| Operating Current (24V DC) | 180mA (maximum) *Excluding power sourced by external devices |
| Ethernet Ports | 10/100Base-TX |
| 2 Wire Network Cabling | UTP 24 AWG or beer (1400m max) |
| LED Diagnostic Indicators | 2 Wire Link, Master/Slave selection, Ethernet port activity |
| Operating Temperature | 0°C – 50°C |
| Dimensions | 106.5(W) x 102.5(H) x 33.5(D) |
CT-2W4L Network Extender
Network Extender
The CT-2W4L is designed to extend Ethernet connections beyond their inherent distance limitation of approximately 100 meters. Capable of providing an extension of up to 1400 meters, this device is suitable for use with the Opal network and Digital IP Cameras, ensuring reliable and consistent connectivity over extended distances.
| Operating Voltage | 12 – 24V DC (absolute maximum 33V DC) |
|---|---|
| Operating Current | 65mA, 100mA with Wi-Fi Active |
| Input Protocols | GAL CAN, OTIS RSL |
| Output Interface | RS-485 |
| Output Protocols | Pixel Technologies Mode 3 |
| Pixel DataBus Length | Up to 64 nodes & 400m (max) |
| Wi-Fi Access point | 802.11b/g/n |
| Configuration | On-Device HTTP Webserver |
| Status Indication | Status (RGB LED) |
| Operating Temperature | 0 – 50°C |
| Operating Humidity | 90% max relative humidity, noncondensing |
| Mounting | Surface mounting or DIN Rail |
| Dimensions (mm) | 68(W) x 95.6(H) x 15(D) |
CT-E10 Lift Encoder
Lift Encoder
The CT-E10 interface module converts OTIS RSL serial link or KONE SPI serial link to the Pixel Technologies DataBus protocol.
| Operating Voltage | 12 – 24V DC (absolute maximum 33V DC) |
|---|---|
| Operating Current | 65mA, 100mA with Wi-Fi Active |
| Input Protocols | GAL CAN, OTIS RSL |
| Output Interface | RS-485 |
| Output Protocols | Pixel Technologies Mode 3 |
| Pixel DataBus Length | Up to 64 nodes & 400m (max) |
| Wi-Fi Access point | 802.11b/g/n |
| Configuration | On-Device HTTP Webserver |
| Status Indication | Status (RGB LED) |
| Operating Temperature | 0 – 50°C |
| Operating Humidity | 90% max relative humidity, noncondensing |
| Mounting | Surface mounting or DIN Rail |
| Dimensions (mm) | 68(W) x 95.6(H) x 15(D) |
CT-E9 Lift Encoder
Lift Encoder
The CT-PX2 interface module is a multi-protocol lift encoder providing a serial link interface for both the Galaxy CAN and Otis RSL and converting these into Pixel Technologies Mode 3 DataBus protocol, providing seamless integration from lift controller to Pixels audio & visual devices.
| Operating Voltage | 12 – 24V DC (absolute maximum 33V DC) |
|---|---|
| Operating Current | 65mA, 100mA with Wi-Fi Active |
| Input Protocols | GAL CAN, OTIS RSL |
| Output Interface | RS-485 |
| Output Protocols | Pixel Technologies Mode 3 |
| Pixel DataBus Length | Up to 64 nodes & 400m (max) |
| Wi-Fi Access point | 802.11b/g/n |
| Configuration | On-Device HTTP Webserver |
| Status Indication | Status (RGB LED) |
| Operating Temperature | 0 – 50°C |
| Operating Humidity | 90% max relative humidity, noncondensing |
| Mounting | Surface mounting or DIN Rail |
| Dimensions (mm) | 68(W) x 95.6(H) x 15(D) |
CT-PX2 Serial Link Interface Encoder
Serial Link Interface Encoder
The CT-PX2 interface module is a multi-protocol lift encoder providing a serial link interface for both the Galaxy CAN and Otis RSL and converting these into Pixel Technologies Mode 3 DataBus protocol, providing seamless integration from lift controller to Pixels audio & visual devices.